You are here: Home / News / News / Satin stainless steel sheet processing effect detail

Satin stainless steel sheet processing effect detail

Views: 0     Author: Site Editor     Publish Time: 2021-11-16      Origin: Site

Satin stainless steel sheet has unique strength, high wear resistance, superior corrosion resistance, and is not easy to rust, and other excellent characteristics. Therefore, it is widely used in the home decoration and fine decoration industry. The following is an introduction to the satin stainless steel sheets.

Here is the content list:

  • Satin finish process

  • Corrosion prevention measures

  • Commonly used stainless steel surface treatment technology

Satin finish process

Satin processing is with the help of a certain hardness and elasticity of the metal wire made of the disc, the surface of the satin stainless steel sheet for irregular rigid polishing so that the traces of satin stainless steel sheet calendering were destroyed so that the surface of the fine grains show a noise granular. The stainless steel after grinding by copper wire wheel has a fine surface and uniform color. When polishing, it is advisable to apply a small amount of "old powder" between the workpiece and the disc to form a microscopic rough surface at the same time, so that the surface of the light reflectivity is reduced, so that the signs and signs become a matte type of light gray appearance. As the surface is not so bright, there is still a silk texture. The satin treatment is to make the sign or sign surface gloss is not as bright as the polish, nor as soft as the brush, but like the texture of the satin-like, dark or not dark, bright or not bright, the surface of the diffuse metallic luster.

Corrosion prevention measures

Storage and hoisting: satin stainless steel sheet storage should be a special storage rack, storage rack should be wood or painted on the surface of the carbon steel bracket or pad with rubber pad, to isolate from carbon steel and other metal materials. Storage, storage location should be easy to lift, and other materials storage area relative isolation, there should be protective measures to avoid dust, oil, rust on the stainless steel pollution. When hoisting, a special hanger should be used, such as a hoisting belt, special clip, etc., and steel wire rope is strictly prohibited to avoid scratching the surface; And in the lifting and placement, should avoid the impact of bump caused by scratches. Transport, the application of transport (such as car, battery car, etc.), and should be clean with isolation protective measures, to prevent dust, oil, rust pollution of stainless steel. Do not drag, avoid a bump, scratches.

Commonly used stainless steel surface treatment technology

The sandblasting method: mainly using the method of spraying micro-glass beads, remove the black oxide skin on the satin stainless steel sheet’s surface.

Chemical method: the use of a pollution-free pickling passivation paste and normal temperature non-toxic with inorganic additives of the cleaning solution for dipping. To achieve the satin stainless steel sheet white color processing purpose. After treatment, it looks like a dull color. This method is more suitable for large, complex products.

It is the responsibility of each manufacturer to produce satin stainless steel sheet that meets the standards Foshan TaiYuDa Steel Group Co., Ltd. conducts many tests on satin stainless steel sheets for connection before they leave the factory, and the quality qualification rate is guaranteed. If you are in the satin stainless steel sheet business, you can consider our cost-effective products.




  +86-139 0241 1336
   +86-133 3646 1234
   Floor 15, Foshan Lanshi Stainless Steel Headquarters Building, No. 95, Foshan Avenue Middle, Chancheng District, Foshan City, Guangdong Province,China 528000
Please Enter Your Information
Contact Us
Copyright © FOSHAN REAL LEADER IMP. & EXP. CO., LTD. ( TAIYUDA GROUP) All Rights Reserved  Technology by leadong